How to Resolve Brother Printer Error Code 35?
To remove Brother printer error code 35, you need to apply the best solutions. Brother printer is the best printing device that will help to print out your important documents without any delay. It is a known machine that is known for its best services. But such as other printing devices, it also occurs some common error that occurs due to many reasons. If you are using this machine and you face Brother printer error code 35, so don’t take tension. To overcome this problem, you can also follow the given solutions to solve this type of error. Apart from it, you can also take the help of experts to solve this type of issue. The experts know very well how to handle this type of issue, so you don’t need to worry. The professionals will provide you one of the best solutions as soon as possible. The experts are available around the clock for your help. To get the instant solutions, call on Brother Printer Customer Support Phone Number USA +(1)-888-846-5560.
Causes for Error Code 35
-
The Error code 35 indicates the statement, i.e., not able to print.
-
The error code persists when a piece of paper clip or paper gets fixed in the printing machine.
-
The error occurs when any power-driven part of the printing machine is not working properly.
-
The error code can occur due to a mechanical fault in your electronic equipment.
Solutions to fix Error Code 35
To fix this error code, you can follow the given solutions that help you to remove this error from your device. To remove this issue, you need to follow the given solution one by one.
Solution 1. Clear the Jammed Paper
-
Use finger hangs on every side of the printing machine and opens it with care.
-
On the left, you find the printer’s scanner cover support.
-
Check if there is any paper jammed in that area. Also, take a look right, left, and center.
-
If you find any bit of paper stuck in those positions, then take it out quickly
-
Then, slide your print head towards the right and then bring it back to where it was and check if any bits of paper are stuck in that location. Also read: How to Solve Brother Printer Paper Jam Problem Easily?
-
If you find any paper there, remove it immediately.
-
Now, open the clear jam cover that is located at the back of your printing machine.
-
View if any paper is jammed in that place; if yes, then replace it quickly.
-
Once you have removed all the jammed paper, then close the cover of your scanner.
Solution 2. Restart the Printer
-
Firstly, connect your printer cable to the power source
-
Now, wait for a few minutes, then connect your printer to the power source once again
-
Then, print a document to check that everything is fine and the printer print properly
We hope these solutions are beneficial to you. If the given solutions fail to solve this problem, so don’t take tension. Just pick up your phone and contact the experts to overcome this problem. They will try to provide one of the best solutions without any delay. The experts also provide help to Install Brother Printer Wirelessly.
|