To get the best results from your TENS unit, it is crucial to ensure that you have right knowledge about electrodes placement. The electrodes are the ones who send the electrical pulses to bring you the pain relief, so their placement is very essential. If you are using the TENS machine for the first time, here are some of the pad ultima 3T electrodes placement tips that you can use.
Identify The Pain Area
You need first to identify the pain area from where the pain is originating even before you place the electrode pads. Sometimes it can be difficult to pinpoint the exact location, especially if the pain starts to spread. To get better results, you should directly put the pads in the area that is most affected by pain. Once you found the pain affected area, you can change the electric impulses according to the desired specifications.
Decide On The Number Of Pads
Now you have to decide on the number of pads you should be placed on the affected area. Usually, two or four pads are a most common number to be placed in one area. When you go for two pads, they’ll give you one channel for pain relief, and when you go for four pads, they will give you four channels. Depending on your preferences you can choose the between the two.
Proper Placement Of Pads
It is important as the pads can be placed vertically, horizontally, diagonally based on your preferences. No matter which positions you choose, you have to be sure that pads are at-least one inch apart. Note that you have to keep electrodes away from each other as it could negatively affect the performance of the electrodes. At the same time, the electrodes should not be too far from each other.
Wet Or Damaged Pads
You must never use the wet or the damaged pads before using the machine. You always have to make sure that pads of your TENS unit are always in good condition. If the pad gets damaged, it has to be replaced before using the machine again. To avoid the risk of electrocution, you must make sure that the pads are dry.
In The End
While using Ultima 3T electrodes, ensure that they are in the best condition for use and will not affect negatively.
|