Repairs are done by Bhutan package specialist as soon as possible.
If you have Bhutan package, be sure to read the text below to get useful information about the package
By reading this article, you will learn about Bhutan package.
Butane package filling valve and its function
What is the identification of the butane package or manometer?
Whenever the package pressure drops, adjust it yourself and solve the package problem. (Common and identical in all packages)
What happens in the butane package if the gas package is disconnected?
How to reset the digital and analog packages of Bhutan?
Learn how to ventilate radiators correctly
Can the package burst? What are the risks of the package?
What should we do to make the package last longer?
How to recognize the errors of Bhutan package?
Training to work with the beta package as an example of Bhutan packages
I will explain the first three items together
Butane filling valve and what you need to know about it –
Manometer package
Adjusting the pressure of the butane package
Package faucet is the first part that is important for consumers to be familiar with
One of the things that often cause problems in the butane package is the pressure drop of the device
[that is, the package is working without water], which in most cases can be easily solved by opening the butane package filling valve and adjusting the pressure dial.
Below you can see two examples of filling valves
In the first photo, the filling valve is not installed
And the second picture is the filling valve on the installation package
In all packages of every model, the filling valve is almost the same with a slight difference.
For example, the plastic part of the filling valve may be black. It may be the filling valve on the left or right side of the package
The filling valve is not installed. blue colorPhoto of a sample of Bhutan milk filler
The next part that you need to be familiar with is the package hand
You can see the picture of the load pressure hand
In the rest of the packages, the bar gauge or manometer is the same shape, when the bar is between 1 and 2, the package has no bar problem and Ali Al-Qaeda should work properly. Unless there is another problem, it is better that the load is between one and a half to 2.
Parma model butan package hand bar
The method of adjusting the load pressure of the butane package:
First, turn the filling valve of the butane package a few times.
Look at the manometer needle until it is in the one to two area.
Pay attention. At this stage, your hand must be on the filling valve. As soon as the needle is approaching 1/5, close the needle.
until the hand stops at one and a half or close to two
Then close the filling valve,
in 98% of cases, the butane package pressure problem will be solved and the package will turn on.
If it still does not turn on. Reset the package
Important note: Be sure to close the filling valve at the end of the work
Note: Some owners of wall-mounted packages have a habit of immediately opening the filler valve in case of any kind of damage to the package and expect the package to be fixed. Of course, it is not a big problem if you open the filling valve several times, but your expectation to make the package is wrong by doing so (so it is better to open the filling valve only when the pressure of the package drops)
Some friends also think that the higher the needle of the package goes, the higher the temperature of the water or the temperature of the heater, if there is no direct connection between the rising of the needle and the temperature of the radiators and the water used.
Just like if your car has more gas, it won't go faster or have more power. it's true ???
Pay attention to these points about the butane filling valve
If the water pressure of your unit is too low, you should adjust the load pressure at the end of the night or early in the morning
If the needle goes more than 2 bar, drain a little water from the air intake part of one of the radiators until the pressure becomes normal, i.e. below 2 bar.
https://tehran3.com/butan-representation/
|