An Ultimate Guide to DIY Flat Roofing System |
Posted: November 21, 2020 |
Flat roofs considerably require an easy process for installing the roofing system and choosing the right material matters since it helps to protect the interior from potential damp and damage. Rubber roofing is one of the best solutions for flat roofs. And EPDM rubber roofing can be an affordable and durable roofing solution for your property. Consider choosing the best EPDM Installers London to get a quality finish. Materials You Will Need EPDM rubber roofing requires some materials to include, such as roofing timber, steel joists, EPDM membrane, copper flashing, foam strengthened, a water-based adhesive, and fibreglass. You will also need gravel and hot tar with modified bitumen and rubber membrane. DIY Installation Process In the following, you will get a step-by-step guide to get the initial procedure of flat roofing installation. Roof Frame: First, you have to inspect your property’s roof. You will find the flat roof a bit inclined, and it is made in this way to make the water run properly. Attach Plywood: Attach a layer of five to eight inches of plywoods within small gaps to ensure adequate contraction and expansion. It is required to incorporate the movements. Underlayment: You need protective and soft fibreglass-strengthened foam. Cut the board in the required size. Fasten that to the plywood with the screws, and ensure they are attached with each another properly. It is required to get the best quality rubber. Take Care of the Corners: You must ensure a better transition so that the water passes away correctly. Proper sizing and screwing of the joints can connect the roofline to the wall. Dry-fitting by Securing with Glue: Now it’s time to lay the rubber. Make the surface smooth without any dirt or particles on it. Thus, the rubber will stick to the board adequately. Secure the system with quality glue. Spread the glue on both sides of the board and don’t be too hard on itself. Overall, consider taking help from an expert if you are first-timer on installing the roofing. Inadequate knowledge can be harmful, and you shouldn’t attempt DIY instead.
|
||||||||||||||||||||||||||||||||||||||||||
|