5 Tips to Help Keep Your Asphalt Paving Strong During Summer |
Posted: January 22, 2021 |
It's still summer in Australia until February. And though it is a very pleasant weather, the amount of heat generated during these times can be quite challenging for roads, driveways, and open parking lots. While everyone was thinking of the beach and backyard barbecue afternoons, some are just thinking about how to maintain their driveway asphalting Sydney. According to a study, asphalt pavements can become too soft under strong sunlight but very brittle during the cold winter nights. That's why there are ways to maintain the quality of your pavement to prolong its life. Now, if you just got a new driveway because the previous one did not stand the test of time and probably due to lack of maintenance, here is a list of tips to help keep your asphalt paving strong, especially during summer. Thoroughly inspect your pavement Proper maintenance can only be done if after you figured out the actual issue of your asphalt. So the first process should be an inspection. Closely inspect your driveway or parking lot for any signs of damage including breaks in the surface, cracks and bubbles. This type of damage, especially the cracks can spread easily if not maintained. It is most likely to happen because the summer heat softens the asphalt. As you inspect your pavement, make sure to pay attention to the smallest signs of imperfections. Doing this could take hours. So, if your parking area is big, make sure to ask for help. Regularly clean your driveway As your driveway and the parking lot is regularly used, you should know that dirt and other contaminants also continuously live on it. On some occasions, your driveway or parking lot can be affected by mould, mildew and other bacterias that could cause irreparable damage in the future. Tire marks, chemicals, and oil spills will also be absorbed which will forever stain your driveway if not cleaned immediately. Proper asphalt driveway cleaning and extreme care also help prevent erosion. While this may vary depending on your pavement, scrubbing thoroughly is a must. Do this at least once or twice a week. Sealcoating your pavement Sealcoating is not something that should be done right after the installation of your new driveway. Do this 2 years after because its purpose is to help preserve the asphalt by making it look like new. Sealcoating is done to help prevent the intense heat from the rays of the sun from damaging the base layer of the asphalt. It also helps to prevent cracking and potholes from developing. While you can do this to your driveway or parking lot, without a doubt, the best results can be achieved by a professional. It should also be redone every few years to help improve the durability of your asphalt. Filling and sealing cracks Cracks on your driveway are common. You can never prevent it from happening but you can always repair it right away so it won't spread and affect the other parts of your driveway. The filling materials can be bought in your local home improvement store but asphalt paving contractors have the best one for a longer solution. While you are filling and sealing cracks, make sure to try to keep the cars away from passing by the affected area because it may damage the surface further. The best way to handle this is to contact a professional asphalting contractor. Patching holes Potholes in asphalt driveways are common especially if it has been there for a long time. However, those holes grow bigger each time someone drives over it. If it has been sitting there for a long time, your car's tire could also be damaged. So, once you see a pothole on your driveway or parking lot, make sure to immediately patch it. The proper way of filling potholes includes cleaning the hole itself of all foreign objects such as water, debris, and more. Now, the actual filling should at least be done by a professional asphalt paving contractor.
|
||||||||||||||||
|